All Issue

2018 Vol.51, Issue 4 Preview Page

Original research article

30 November 2018. pp. 677-685
Abstract
References
1
ASTM. 1985. Standard Test Method for Classification of Soils for Engineering Purposes. American Society for
2
Korean Agency for Technology and Standards (KATS). 2006, Standard method of classification of soils for
3
Casagrande, A. 1932. Research on the Atterberg Limits of Soils. Public Roads. 13(8):121-136.
4
EU. 2013. Hard surfaces. Hidden costs.
5
Francis Beaufort. Beaufort Wind Scale. U.K. Royal Navy (http://www.spc.noaa.gov/faq/tornado/beaufort.html).
6
Korean Agency for Technology and Standards (KATS). 2012. Standard test method for particle size distribution of
7
Korean Agency for Technology and Standards (KATS). 2015. Standard test method for liquid limit and plastic limit
8
Korean Agency for Technology and Standards (KATS). 2015. Standard test method for water content of soils(KS F
9
Korean Agency for Technology and Standards (KATS). 2016. Standard test method for density of soil particles(KS F
10
MOE. 2013. Comprehensive Topsoil Conservation Plan ('13-'17). p.50-103.
11
MOE. 2017. Regulations on the Preparation of Environmental Impact Assessment, Ministry of Environment Notice
12
Oldeman, L.R., R.T.A. Hakkeling, W.G. Sombroek, 1991, World Map of the Status of Humaninduced Soil Degradation (GLASOD): An Explanatory Note. International Soil Reference and Information Centre. Wageningen.
13
MOE. 2007. Standard Design Guidelines for Muddy Water Reduction Facility.
14
MOE. 2010. Research on Value Evaluation and Examples for Soil and Groundwater.
15
MOE. 2016. Guidelines for the Notification of Post-Environmental Impact Survey Results.
16
MOE. 2001. A Study on the Conservation of Surface Soil and Erosion Control
Information
  • Publisher :Korean Society of Soil Science and Fertilizer
  • Publisher(Ko) :한국토양비료학회
  • Journal Title :Korean Journal of Soil Science and Fertilizer
  • Journal Title(Ko) :한국토양비료학회 학회지
  • Volume : 51
  • No :4
  • Pages :677-685
  • Received Date : 2018-11-28
  • Revised Date : 2018-12-05
  • Accepted Date : 2018-12-05